Measurements & energy

Room area

Plan your quantities using your measurements and product label.

Changing units clears affected measurements and unit prices. Enter decimal feet, e.g. 5.5 for 5 ft 6 in.

Formula & scope

For rectangular rooms: area = length × width. Perimeter = 2 × (length + width). Divide irregular rooms into rectangles and add their areas.

Faint examples are hints only and are never used as inputs. Enter your own project values. Results are estimates; check the product label before ordering.

Explore all calculators →

Practical guide · English

Measure the usable shape

Worked example

For a rectangular room 4 m long and 3 m wide, enter 4 and 3 in Metric mode. The area is 12 m² and the perimeter is 14 m. Area helps plan floor coverings; perimeter helps plan a border. They are different quantities and cannot be substituted for one another.

What can change the estimate?

For an L-shaped room, sketch two non-overlapping rectangles, calculate each area and add them. Do not add their perimeters to estimate the outside boundary: the shared dividing edge would be counted twice. Measure alcoves separately and keep a note of the units.

Use the result

Transfer the measured area to the flooring or tile calculator. Add waste there once, rather than increasing the room dimensions and adding the same allowance again.