Renovation

Flooring & packs

Plan your quantities using your measurements and product label.

Changing units clears affected measurements and unit prices. Enter decimal feet, e.g. 5.5 for 5 ft 6 in.

Enter prices in the selected currency. No exchange-rate conversion. Changing currency clears prices.

Formula & scope

Required area = area × (1 + waste / 100). Packs are rounded up. 10% is an editable starting example, not a guarantee. Check the installation pattern and manufacturer. Cost excludes labour and accessories.

Faint examples are hints only and are never used as inputs. Enter your own project values. Results are estimates; check the product label before ordering.

Reference / manufacturer guidance
Explore all calculators →

Practical guide · English

Turn floor area into whole packs

Worked example

For 20 m² of measured floor with a 10% waste allowance, required coverage is 22 m². If each pack covers 2.2 m², the result is 10 whole packs. At $40 per pack, the material subtotal is $400.

What can change the estimate?

Use the exact pack coverage on the selected product. The allowance is a planning input, not a universal installation recommendation. Room shape, board direction, patterns and unusable cuts affect waste. Check whether unopened packs can be returned.

Use the result

Keep underlay, transitions, trim, delivery and labour outside this material subtotal unless you budget them separately. Confirm the layout and quantity with the installer before ordering a large batch.