Measurements & energy

Appliance electricity cost

Plan your quantities using your measurements and product label.

Enter prices in the selected currency. No exchange-rate conversion. Changing currency clears prices.

Formula & scope

kWh = watts ÷ 1000 × operating hours × days. Cost = kWh × your rate. Excludes fixed charges, delivery, taxes and rebates. Cycling appliances do not run at rated power continuously. Use measured average power or actual run-time.

Faint examples are hints only and are never used as inputs. Enter your own project values. Results are estimates; check the product label before ordering.

Reference / manufacturer guidance
Explore all calculators →

Practical guide · English

Separate power from energy

Worked example

An appliance drawing 1,000 W for 2 hours a day over 30 days uses 60 kWh. At an energy rate of $0.15 per kWh, the estimated energy charge is $9. Enter the rate in currency per kWh, not cents: 15 cents is 0.15.

What can change the estimate?

A nameplate power rating is not always the average draw. A thermostat-controlled heater or refrigerator cycles, and settings can change consumption. A suitable energy monitor or manufacturer energy-use figure can provide a more useful average.

Use the result

This estimate does not reproduce an entire utility bill. Standing charges, delivery, tiered or time-of-use pricing and taxes may apply separately. Compare scenarios using consistent operating hours and an appropriate local rate.