Garden

Mulch & delivery

Plan your quantities using your measurements and product label.

Changing units clears affected measurements and unit prices. Enter decimal feet, e.g. 5.5 for 5 ft 6 in.

Enter prices in the selected currency. No exchange-rate conversion. Changing currency clears prices.

Formula & scope

Volume = area × depth. Extra allowance is applied before rounding bags up. Bulk cost assumes exact volume ordering; confirm supplier minimums. Bag labels must specify volume, not weight.

Faint examples are hints only and are never used as inputs. Enter your own project values. Results are estimates; check the product label before ordering.

Reference / manufacturer guidance
Explore all calculators →

Practical guide · English

Measure depth over the covered area

Worked example

For 10 m² at 5 cm depth with no allowance, volume is 0.5 m³, or 500 L. With 50 L bags, the estimate is 10 whole bags. A 10% allowance increases the volume to 550 L and the count to 11 bags.

What can change the estimate?

Use the intended finished depth, avoiding confusion between centimetres and metres. Remove paths or other uncovered surfaces from the measured area. Settlement, product texture and existing material can affect the quantity you actually need.

Use the result

Compare bagged and bulk costs on the same volume basis. The bulk subtotal includes the entered delivery charge but does not establish a supplier minimum, access suitability or spreading cost.